Skip to content

Inventory: receipts, usage, counts and reservations

Record receipts, usage and count adjustments, set reorder points and reserve material for production orders.
Type
Help center
Updated
Reading time
2 min
Sections
5
On this page (5)

Inventory tracks stock of the sheet goods, edge banding and hardware in your catalog and reserves material for production orders. In Zeder Studio you never type a stock number: it’s calculated from the movement history.

How stock is calculated

Every receipt, usage and correction goes into a history, like a ledger. Stock is the sum of that history, so you can always see who moved what, when and with which reference. In the list, History opens a material’s movements with a running balance.

ColumnMeaning
On handWhat’s physically in the shop according to the history.
ReservedSet aside for open production orders.
AvailableWhat you can use or promise.
ReorderYour reorder point.
Available = On hand − Reserved
White melamine 5/8″: 10 sheets on handReserved 4Available 6
Example: 4 reserved sheets leave 6 available; at 5 or fewer it shows up under To reorder.

Record movements

Three buttons sit above the list:

ButtonUse it for
ReceiveA purchase or supplier delivery.
ConsumeMaterial used, optionally against an order.
Count correctionEnter what you physically counted; the difference is recorded.
  1. Pick the type and the Material.

  2. Enter the Quantity (or Counted quantity for a correction) and, optionally, the Unit cost and the Order.

  3. Put the invoice or packing-slip number in Note / reference and click Record.

Before saving, the app warns you if on-hand would go negative or drop below what’s reserved, and lets you confirm. If a count matches on-hand, nothing is recorded.

Who records and who sees costs

The owner, admins and members record movements and reserve material; Viewer and Workshop roles can only look. The Unit cost on each movement is visible only to people with Sees amounts turned on. See team and roles.

Reorder point and To reorder

In the catalog, each material has a Reorder point (“Warn when available stock drops to this quantity”). When available stock reaches that number or less, the material is flagged Low and listed under To reorder. The Low only filter shows just those.

Reserve material for an order

Reservations are made from the order, in the Reserved material panel:

  • By hand: pick a material and quantity and click Reserve.
  • From the quote: Reserve from quote takes the frozen-spec lines linked to catalog materials and reserves their quantities (skipping materials already reserved on that order).

From then on, the reservation follows the order:

What happens to the orderWhat happens to the reservation
Moved into the done stageConsumed: on-hand goes down.
CanceledReleased: it’s available again.
You click ReleaseReleased by hand (from the order, or from the material’s Open reservations).

Save this, optimize the cut list and quote it in Zeder Studio.

Frequently asked questions

Can I fix stock without deleting movements?

Yes. Use Count correction: enter what you counted and the difference is recorded as another movement.

Do I need Production to reserve material?

Reservations are made from a production order, so you also need the Production module (the Full suite includes both).

Cut better starting with your next job

Create an account and use the full Workshop plan for 14 days. No card; afterwards you drop to the Free plan, not a lockout.