Skip to content

Materials: sheets, banding and hardware catalog

Add sheets, edge banding and hardware with sizes, kerf, grain and cost; import the Mexico starter catalog or your own CSV and assign suppliers.
Type
Help center
Updated
Reading time
3 min
Sections
7
On this page (7)

Materials is your shop’s catalog: sheet goods, edge banding, hardware and everything else you buy. There’s one catalog for all of Zeder Studio (Cut, Design, Quotes and Inventory): Cut pulls sheet sizes and kerf from it, Quotes pulls costs and Inventory tracks stock against it. Set it up right once and everything downstream works with real numbers.

Material kinds and units

KindExamplesTypical unit
SheetWhite melamine 5/8″, 3/4″ MDF, 1/4″ back panelsheet
Edge bandPVC edge banding 15/16″ × 1 mmm
HardwareCup hinges, drawer slides, pullspc
OtherGlue, screws, countertoppc, m or m²

Available units are sheet, m, m² and pc. Picking a kind suggests a unit, but you can change it.

Add a material

  1. In Materials, click New material and choose the Kind.

  2. Fill in Name (required), SKU, Brand, Finish and Color. Sizes (Length, Width, Thickness) use your workshop’s units. For an edge band, thickness is the band’s thickness.

  3. Sheets get two extra fields: Blade kerf, the width your saw blade removes, and Edge trim, what you take off each factory edge to get a clean, square edge. Check Has grain for wood-grain and directional textures.

  4. Enter Cost (per sheet, meter or piece, depending on the unit), Sell price, Supplier and Reorder point: “Warn when available stock drops to this quantity.” Click Save.

The Mexico starter catalog

To skip the blank page, use Import starter catalog (Mexico). It adds about 150 sheets, edge bands and hardware items common in Mexico, without prices. SKUs you already have are skipped, so running it twice won’t duplicate anything. Imported items carry a starter badge: check sheet sizes with your supplier and enter a cost before quoting. If you buy in the US, you’ll likely get more out of importing your own list as CSV.

Import and export CSV

Import CSV loads a list from Excel; Export CSV downloads what you’re looking at (it respects the kind filter and the search). Import is header-driven: columns it doesn’t recognize are ignored. Comma or semicolon delimiters both work. A row whose SKU already exists updates that material; otherwise a new one is created. When it finishes you’ll see “CSV: N new, N updated, N with errors.”

ColumnWhat goes in it
kindsheet, edgeband, hardware or other (blank means sheet)
nameName. The only required column.
skuKey used to update instead of duplicate
brand, finish, colorBrand, finish and color
length_in, width_in, thickness_inSizes (use _mm instead of _in for metric)
kerf_in, trim_inKerf and edge trim
grain1 has grain, 0 no grain (yes also works)
unitsheet, m, m2 or piece
cost, priceCost and sell price
supplierSupplier name; created if it doesn’t exist
reorder_pointReorder point
kind,name,sku,length_in,width_in,thickness_in,kerf_in,trim_in,grain,unit,cost
sheet,White melamine 3/4,MEL-WHT-34,97,49,3/4,1/8,3/8,0,sheet,62
sheet,Walnut melamine 3/4,MEL-WAL-34,97,49,3/4,1/8,3/8,1,sheet,85
A minimal CSV for sheet goods (illustrative values; use your supplier’s).

Suppliers

The Suppliers button opens the list of who you buy from. Each supplier has a name, contact, phone, email and notes. Deleting a supplier leaves its materials without a supplier; the materials themselves stay.

Archive instead of delete

Materials are never deleted, they’re archived, because inventory history and older jobs still point to them. Use Archive to hide what you no longer buy, and Show archived → Restore if it comes back.

Why prices matter

With a cost per sheet on file, Cut shows the plan’s Estimated cost and can prioritize Lowest cost; Quotes builds line items from real costs; Inventory uses the reorder point to list what needs restocking. A sheet with no price still cuts fine, it just can’t tell you what the cabinet costs you. To ballpark sheet counts per job, see how many sheets a kitchen takes.

Save this, optimize the cut list and quote it in Zeder Studio.

Frequently asked questions

Does the Mexico starter catalog include prices?

No. It includes names and sizes for about 150 common materials; you enter costs from your own supplier.

Can I delete a material?

Materials are archived rather than deleted because inventory history and past jobs still reference them. You can restore them anytime.

Cut better starting with your next job

Create an account and use the full Workshop plan for 14 days. No card; afterwards you drop to the Free plan, not a lockout.