Free cutting optimizer, no sign-up
| # | Part | Qty | Length (in) | Width (in) | Grain | Edge | |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 |
Save and export: create your free account
Save your cut lists, export CSV and track your offcuts with Zeder Studio.
Save this, optimize the cut list and quote it in Zeder Studio.
The optimizer above runs the same engine as the Zeder Studio Cut module, limited to one sheet material and 50 parts per run. It runs in your browser: your sizes aren’t saved or sent anywhere until you create an account.
How the calculation works
The optimizer looks for layouts made of guillotine cuts: every cut runs edge to edge across the piece being cut, the way a panel saw or sliding table saw works. It rips the sheet into strips, crosscuts each strip into parts and, where a part shares a strip with a narrower one, trims it last.
For every sheet it applies these rules:
A strip fits if: sum of parts + kerf × (parts − 1) ≤ usable length
Strips fit if: sum of strip widths + kerf × (strips − 1) ≤ usable width
Yield = part area ÷ area of the sheets used
- Kerf: every cut removes one blade width. The default is 4 mm (about 5/32"); a standard table saw blade is closer to 1/8". Enter yours. More in kerf and grain.
- Trim: the free tool has no trim field. If you trim factory edges, enter the trimmed sheet (for example 95 1/4 × 47 1/4 in instead of 96 × 48). In the app it’s Trim per edge.
- Grain: check Grained and parts set to Lengthwise or Widthwise won’t rotate. Parts set to Any can turn to fit better.
- Free limit: pieces count, not rows. Three rows with quantity 20 are 60 pieces, over the 50-part cap.
Worked example
A 4 × 8 sheet (96 × 48 in), 1/8" kerf, no trim, 2 cabinet sides at 30 × 23 1/4 in and 3 shelves at 30 × 22 1/2 in. One layout that works, in two 23 1/4" strips:
Strip 2: 30 + 30 + 1/8 = 60 1/8 in ≤ 96 ✓
Width: 23 1/4 + 1/8 + 23 1/4 = 46 5/8 in ≤ 48 ✓
Part area: 2 × 697.5 + 3 × 675 = 3,420 sq in
Sheet area: 96 × 48 = 4,608 sq in
Yield: 3,420 ÷ 4,608 = 74.2% · Waste: 25.8%
Everything fits on one sheet. The optimizer may draw a different layout, but the areas don’t change: on one sheet the yield is 74.2%. The shelves sit in 23 1/4" strips, so each needs a final 3/4" trim cut, the "third stage." What’s left of strip 2, roughly 36 × 23 in, is an offcut worth keeping.
Common mistakes
- Kerf left at zero. The diagram looks perfect and the last part at the saw comes out short.
- Using the nominal sheet size. Measure the sheet you bought; see standard sheet sizes.
- Locking grain on everything. Hidden parts and solid colors don’t need it, and each constraint lowers yield.
- Comparing yield across different jobs. A list of small parts always yields more; compare layouts of the same job.
- Forgetting edge banding. Thick banding changes the cut size. The app has Deduct edge band from cut size.
Tips
- Paste your cut list from Excel or Google Sheets under Import; it recognizes columns like Name, Length, Width and Qty, and fractions like 23 7/8.
- Measure the first strip before you keep going. If it’s right, the rest of the diagram will be.
- Learn every symbol in how to read a cut diagram, and cut waste with these techniques.
When to move to the app
The free tool doesn’t save jobs or mix materials. On the Cut plan you optimize with no part limit, mix sheets from your catalog, choose cutting stages and objective (optimization settings), save and reuse offcuts (reading the plan), print QR labels, get the PDF without a watermark and export draft CNC files (plan outputs). A free account saves up to 3 projects. See pricing.
Related
How to read a cut diagram
What every number, arrow and hatched area on a sheet cut diagram means, and the order a sheet is actually cut in.
How to reduce melamine waste
Proven ways to get more out of every sheet: grain, design dimensions, offcuts, kerf, cut order and how to measure your real waste.
Enter and import parts
How to fill the parts table, paste a list from Excel or Google Sheets, open a CSV and which columns are recognized (length, width, qty, grain, banding).
Sheet calculator
Work out how many melamine, MDF or plywood sheets you need from your parts, edge trim and waste percentage.
Cutting optimizer
Optimize melamine, MDF and plywood cutting with grain and kerf, keep offcuts, print QR part labels and export to CNC: DXF, G-code, MPR, CIX.
Kerf and grain, explained
What kerf (blade width) is, typical values on common saws, and when grain direction must be respected while optimizing cuts.
Frequently asked questions
Does the free optimizer have a limit?
Yes: up to 50 parts per run, counting the quantity on every row. No sign-up needed.
What kind of cuts does it plan?
Guillotine cuts, edge to edge, like a panel saw or sliding table saw. It accounts for blade kerf and grain direction.
Are my sizes saved?
No. The calculation runs in your browser and the free tool doesn’t save jobs. You need an account to save them.
How do I add edge trim in the free version?
Subtract the trim from the sheet size before you enter it, for example 95 1/4 × 47 1/4 in for a 4 × 8 sheet trimmed 3/8 in per side. The app has a trim-per-edge setting.
Cut better starting with your next job
Create an account and use the full Workshop plan for 14 days. No card; afterwards you drop to the Free plan, not a lockout.