Skip to content

Send a design to Cut and to Quote

How a design revision is created, what happens when you send it to Cut or Quote, and which designer settings apply to the whole shop.
Type
Help center
Updated
Reading time
3 min
Sections
5
On this page (5)

Once a design is ready, Zeder Studio turns it into shop work: a cut list to optimize in Cut, or a quote built on your costs. Both start from a numbered revision of the design, so you always know which version was cut and which version was quoted.

What a revision is

Every send saves the design and creates a revision holding the cut list at that moment. You’ll see “Revision N created · X parts.” Move a cabinet afterwards and that revision stays as it was; send again to create the next one.

DesignRevision NCut jobQuote
Each send creates a revision; the cut job or quote is built from it.

Send to Cut

  1. In the designer, open Entregables → Enviar a Cortes (optimizar) (Deliverables → Send to Cut, optimize).

  2. The app saves, creates the revision and opens a new cut job showing “Parts loaded from the design (revision N).”

  3. Check parts, sheet goods and saw settings, then optimize like any other job. See parts and materials.

Send to Quotes

  1. Open Entregables → Enviar a Cotización (Deliverables → Send to Quotes).

  2. New quote opens with “It will be filled from the design revision’s cut list.” Enter a title and, optionally, customer and project.

  3. Click Create quote, then set pricing, waste and taxes as described in build a quote.

How the line items are filled:

LineHow it’s calculated
SheetPart area per material plus the default waste, rounded up to whole sheets when the catalog material has a sheet size. Without a sheet size it’s charged per m².
Edge bandMeters of banding from the banded edges of each part.
HardwareHardware pieces from the design (hinges, drawer slides, pulls…).

Costs come from your material catalog, matched by name or SKU. If a material has a Sell price, the line uses it as a fixed price instead of your markup.

Warnings you may see

Cabinets without a recipe: classic engine

If a cabinet has no recipe in the catalog, it’s broken down with the classic engine (generic formulas). The app lists those cabinets and asks “Send anyway?” You can go ahead, but check their parts before you cut or quote.

The design changed after the quote

Edit the design after quoting and the quote shows “The design changed after this quote. Check whether you need a new version.” Send a fresh revision if the price needs to follow the new layout.

Empty design

A design with no cabinets can’t be sent: add at least one.

Designer settings: shop-wide or this browser

The designer’s Configuración (Settings) holds two kinds of settings:

SettingSaved forWho can change it
Construction, hardware, prices, materials, handle style, shop detailsThe whole shopOwner or Admin
Theme, display, layers, renderThis browser onlyEach user

That way everyone gets the same cut list and the same quote. If a Member changes a shop setting, the app says the change was not applied. The first time, if the shop has no saved settings but your browser does, the app asks whether to use your browser’s settings for the whole shop or the factory defaults.

Save this, optimize the cut list and quote it in Zeder Studio.

Frequently asked questions

Can I send the same design more than once?

Yes. Each send creates a new numbered revision; earlier revisions don’t change.

Why did my quote come out with zero costs?

Costs are pulled from the material catalog by name or SKU. If the material is missing or has no cost, add it under Materials.

Cut better starting with your next job

Create an account and use the full Workshop plan for 14 days. No card; afterwards you drop to the Free plan, not a lockout.